Skip to main content

.htaccess remove authentification from child directory

Suppose you have a public directory on Apache webserver protected with AuthType Basic using .htaccess file. And you want to remove the authentification from some child directories. There is no AuthType None option for .htaccess. The solution is to place an .htaccess file into the desired child directory with the following option

Satisfy Any
Labels:

Comments

Post a Comment

Popular posts from this blog

Increase USB Flash Drive Write Speed

The one of the biggest problems of usb flash drives is a slow data write speed. This article will guide you through the process that can possibly increase your flash stick write speed. Okay, first I bought Transcend 8GB usb flash stick. It had been formatted with FAT32 filesystem initially. So I decided to run data read/write speed test. Mount the filesystem and execute following # hdparm -t /dev/sdb /dev/sdb: Timing buffered disk reads: 102 MB in 3.05 seconds = 33.43 MB/sec $ dd count=100 bs=1M if=/dev/urandom of=/media/disk/test 100+0 records in 100+0 records out 104857600 bytes (105 MB) copied, 29.5112 s, 3.6 MB/s The disk read speed is good enough, but the write speed is not so good. That's because most of NAND flash drives (the most commonly used flash sticks) have 128k erase block size. Filesystems usually have 4k (4096 bytes) block size. And here we came into problem. If the filesystem blocks are not aligned to flash drive blocks, the performance overhead during disk writ...
43 comments
Read more

Mysqld-bin logs problem

After continuous running of Mysql server, I've noticed that /var/lib/mysql directory uses too much disk space. The reason of that problem was a set of mysqld-bin.xxxxxx files. Each of that file was 1GB in size. First I thought that I can stop the Mysql server and remove that files, but I didn't want to act this way because there was sensitive data in databases that I didn't want to loose. So I found the better way to achieve this. Connect to Mysql server and perform the following mysql> flush logs; mysql> reset master; That's it! After that the all logbin files should be removed. Also you can disable mysqld-bin logging completely by commenting out log-bin line in my.cnf and restarting Mysql server daemon.
11 comments
Read more

Compro VideoMate Vista M5F Linux Setup

If you've recently purchased Compro VideoMate Vista M5F tv tuner card and want to get it working on your linux machine, then you are just in a few steps before you will get this done. I bought this card two weeks ago and finally setup it yesterday. But don't be upset, this will not take so long for you. So lets begin. First check that you card is correctly plugged into the system # lspci -v 04:00.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1) Subsystem: Compro Technology, Inc. VideoMate T750 Flags: bus master, medium devsel, latency 32, IRQ 21 Memory at 90100000 (32-bit, non-prefetchable) [size=2K] Capabilities: [40] Power Management version 2 Kernel driver in use: saa7134 Kernel modules: saa7134 If you see that then the card is connected and you can continue. On my linux distribution (Archlinux) the card is automatically detected as Compro VideoMate T750 and all required saa7134 modules are loaded. This is not right so ...
6 comments
Read more